U87 Studio Test

Because it was national soundcheck day "12-12-12", we went into the studio to get a few samples of our U87 clone microphone detailed previously. Figured I'd stir the pot a bit Anyways, it was just acoustic guitars this time, but we were able to put a few mics up to compare. Among them, 2 original vintage U87's. We did not get the Klaus U87 up because our friend down the street who own it was having a pretty rough day. He had to put his dog down who he had been walking for near 20 years, so it was all-in-all a bad day to be borrowing mics.

Vocal Microphone and Capsule Testing

Time for another round of studio tests.  I have been working on a developing variety of microphone projects lately and have come to discover that good, actionable information about various microphone components is actually quite scarce on the internet.  Usually tiny gems of data are scattered all over the internet and buried hundreds of posts deep in often un-related web forum topics.  To compound the problem, egos, chest thumping, marketing hype, "trade-secrets", and general online drama often cloud discussions or turn into useless drivel.

Also, due to the infinite range of recording environments and monitoring systems, the often-provided lone audio sample can only describe a condition to a certain extent.  One mic is "open". . . well, compared to what?  Another one could be "opener".  Because of this,  I have found relative data to be more helpful, but that requires repetitive, structuring testing in a reasonably controlled way different from regular music production.  Even then,  concrete conclusions are hard to find and it is difficult to establish a "baseline", but in the end, these devices must be judged and improved by listening and meaningful comparison.  So, even if messy and imperfect, we must try.

With that as a framework, I entered the studio earlier today with a trunk full of DIY microphones and prototypes to test and attempt to provide some actionable information for people looking to build recording microphones.

More after the jump.

Nuts, Cables, and Random Observations about Fret Tools

I was a bit tired and tired of basses today, but a package came in the mail from Redco. I thought I had lost my trusted cheapy Mogami instrument cable, but it ended up being at the studio. . . but, I had already ordered parts to replace it. . . 75 feet of Canare L-4E6S Quad mic cable.

I read on the talkbass.com web forum that if you wanted to get super-duper trick, you could use the twisted pair XLR cables and connect the shield to the instrument end of the cable and not at the amp end. . . essentially, you extend the control cavity shielding all the way down the length of the cable. . .so I thought I'd give it a go.

Vintage U87 Circuit Clone Microphone Build

At the heart of every successful recording studio is a closely guarded vault of high quality microphones.  The ability to match a high quality microphone to whatever is being recorded is of critical importance to the recording process.  Many vintage microphones now cost tens of thousands of dollars and new production boutique microphones while not as costly as original vintage units in good condition also demand a high premium.  With the help of some enterprising people in the DIY community, it is now possible with a little bit of research and determination to build quite a formidable arsenal of clone microphones that faithfully reproduce the original vintage electronic circuits.  One staple large diaphragm microphone design is the original Neumann U87.  In this post, I will build a clone of the original U87 circuit. 

Classic Audio Products VC528 Build

After reviewing my in-depth photo documentation of several microphone preamp builds, Jeff Steiger, the owner and CEO of Classic Audio Products of Illinois decided to officially employ my photo-documentation services for his VC528 kit.  This post utilizes the photos I made from the official build documentation.

The VC528 is a unique 500 series or 51X module in that it is a "go-between" design.  While it is common to find preamp circuits from a variety of vintage consoles in lunchbox form, this module  re-creates the rest of the channel strip circuit of the vintage API console all the way out to the channel fader.  Many have referred to this module as "audio bacon" because it can be inserted after or before any other outboard device and add the analog goodness of a full frame vintage console at a fraction of the cost and space.  VC528 allows for a wide range of experimentation with gain staging when inserted into the signal chain because you can drive whatever previous device hotter or softer than normal and adjust for proper gain with the VC528 before hitting the recorder.  Another common use for the VC528 is inserting a pair on the main stereo mix bus.  For this application, Jeff offers stereo kits with closely matched resistors for optimal consistency of the left and right channels.

In this post, I will show a complete VC528 kit build from start to finish.  An assembly aid document as well as bill of materials, trouble-shooting tips, and calibration procedure can be found here.

Basses for Newbies - Pickup Shootout

Ever since we ran into the unfortunate "SX Effect" distortion problem in the stock SX pickups, I've been on a quest to locate a suitable replacement pickup for the basses for newbies builds.  While it could be argued that the stock pickups work just fine for a beginner, one of my design goals is to deliver a bass capable of holding up to all types of situations a working musician may encounter.  A real working tool that can be a long-term bass and not require upgrade (at least on the basis of playability or sonics). . . well, ever. 

Basses for Newbies - Bass #6

Let's get #6 started. . . back to SX's . I've been doing a lot of jazz basses lately, so I figured I'd try something different with a P/J.

This bass was the one that's started this whole basses for newbies ordeal. It's been sitting in the studio making its way onto various projects that come through. I leveled the frets already, but think I need to take another look at the level job and probably cut more fall-off. Hopefully this one will be straight forward and fast. Mainly, this bass makes noise so I will try to shield and re-wire. . . and throw in neck inserts. I was debating the series/parallel switch on a P/J, but I think I'll put that in as well just for kicks and giggles. . . see what "super phat" mode sounds like.

Thinking about trying out a GFS p-bass pickup on the neck position and see if the shielding alleviates the hum issues on the stock bridge position SX pickup because the "SX effect" only seems to happen on the neck pickup. If it still hums, I'll have to look into a split coil bridge pup.